Our top picks for the best WORX 20V batteries in 2026 are the WORX WA3669.J 20V 2.0Ah Battery (Best Overall), the WORX WA3674.J 20V 4.0Ah Battery (Best Budget), the WORX WA3669.J2 20V 2.0Ah Battery 2-Pack (Editor’s Choice), the WORX WA3613 20V 2.0Ah Battery & Charger Kit (Also Great) and the WORX WA3675.J 20V 5.0Ah Battery (Also Great). All of them fit WORX 20V PowerShare tools. That means your choice depends on how hard your tools pull on a pack and what you already keep on the charger shelf.

Match capacity to the tool first. A 2.0Ah pack keeps a string trimmer or hedge trimmer easy to handle, while a 4.0Ah or 5.0Ah PowerShare PRO pack pays off on a mower or circular saw that drains small packs fast. After that, check whether a charger comes in the box and whether your higher-voltage tools need packs in matched pairs.
The real risk is a pack that doesn’t fit the job. A small pack on a mower quits partway across the yard, and a bare battery with no charger at home sits useless until you order one. Cheap third-party packs shaped like WORX add another risk, because weak cells and thin protection circuits show up as heat and short runs.
What Should You Look for in a WORX 20V Battery?
The right pack is the one whose capacity fits the draw of your tools and that works with the charger and packs you already own. Get that match wrong and you carry more weight than a trimmer needs, run out halfway across the lawn, or wait on a charger you never bought. If you haven’t committed to a platform yet, the best outdoor power tool batteries from every major brand are compared side by side in our main battery guide.

How Many Amp-Hours Do You Need for Your Tools?
For a string trimmer or a light blower, a 2.0Ah pack is enough. For a mower or a circular saw, step up to 4.0Ah or 5.0Ah. Amp-hours set how long a pack runs on one charge, and heavy-draw tools burn through that charge fast.
Amp-hours (Ah) measure how much charge a pack stores. At the same 20V, a higher-Ah pack holds more energy, so the same tool runs longer before the charge-level indicator drops to its last bar. How fast that energy goes depends on the motor’s load. A trimmer spinning line through grass pulls modest current, so even a small pack covers the fence lines and the driveway edge. A mower pushing a blade through thick or wet grass, or a circular saw ripping lumber, pulls far harder and empties a small pack quickly.
The trade-off for more capacity is weight and charging time. More capacity means more cells inside the housing, and on a trimmer or blower you hold that weight at arm’s length the whole time. Those extra cells also take longer to fill on the same charger, so a big pack is slower to turn around between jobs. On handheld tools a lighter pack usually serves you better. On a mower that rolls on wheels, the extra weight costs you nothing and the extra runtime gets the lawn finished.
Are All 20V WORX Batteries the Same?
No. They share one PowerShare connection and voltage, so any of them fits a 20V PowerShare tool, but capacity and pack line differ from one pack to the next.
That shared platform covers 140+ cordless products. WORX’s updated pack design changed only the look: newer packs work the same as earlier ones and fit the same tools. Standard PowerShare packs are the compact everyday packs. PowerShare PRO packs pair higher capacity with an intelligent battery management system that optimizes the individual lithium-ion cells, a thermoplastic housing that keeps those cells cooler, and 360° cell protection against vibration and impact. Those features matter most when a tool pulls hard for a long stretch, because heat cuts a run short and wears cells out.
PRO packs are the best match for WORX Nitro products, so a Nitro mower or saw is where PRO pays back. For a trimmer or blower, a standard pack does the job.
To confirm a pack fits what you own, read its label. The WA model number, voltage and Ah rating are printed there. Match the WA number against the battery list in your charger’s or tool’s manual before you order.
Which Charger Should You Pair With a WORX 20V Battery?
If your packs need to go back to work the same day, get a quick charger. The WA3881 quick charger and the WA3884 dual-port quick charger bring a 2.0Ah pack to full in one hour.
A standard charger takes the same packs but works more slowly, which is fine when the trimmer sits until next weekend. The dual-port WA3884 holds two packs, so a matched pair for a 40V tool can go on the charger together instead of being swapped by hand.
Current 2.0Ah PowerShare packs work with the WA3742, WA3769, WA3881, WA3770, WA3884 and WA3835 chargers. If one of those is already in your garage, a bare pack is all you need. A bare pack ships without a charger, so buying one with no charger at home leaves it useless until a second order arrives.
A 4.0Ah or 5.0Ah pack also takes longer to fill than a 2.0Ah pack on the same charger, because it holds more charge. That makes a quick charger most worthwhile for owners of heavy-draw tools.
How Do You Power Higher-Voltage WORX Tools With 20V Packs?
A 40V PowerShare tool takes two 20V packs at once and draws on them together, so the packs that run your 20V trimmer also run the bigger mower or blower. WORX’s 80V tools combine more 20V packs again.
A pair only lasts as long as its weaker pack. When one pack empties first, the tool stops, and the charge left in the other pack goes unused until the next session. That’s why both packs should match in capacity and start from the same charge level. A 2.0Ah pack paired with a 4.0Ah pack, or a full pack paired with a half-used one, ends the run early.
Buy and keep packs in matched pairs, and charge them together. A 40V tool owner needs at least one pair of the same capacity. A second matched pair lets one set charge while the other works through a big yard.
The 5 Best WORX 20V Batteries of 2026
The five packs are the WORX WA3669.J 20V 2.0Ah Battery, the WORX WA3674.J 20V 4.0Ah Battery, the WORX WA3669.J2 20V 2.0Ah Battery 2-Pack, the WORX WA3613 20V 2.0Ah Battery & Charger Kit and the WORX WA3675.J 20V 5.0Ah Battery. The 2.0Ah packs keep a trimmer or blower easy to handle and quick to recharge. The 4.0Ah and 5.0Ah PRO packs give that up for longer runs on each charge. The two-pack and the kit change what else you have to buy, not how long a pack lasts. Owners of light trimmers and blowers, owners of heavier saws and mowers, and first-time buyers who still need a charger will each find a pack that fits.
#1 WORX WA3669.J 20V 2.0Ah Battery — Best Overall
If your WORX tools are mostly trimmers and blowers you carry by hand, this pack keeps the weight off your arm and refills fast on a WA3881 or WA3884 quick charger between jobs. It also pairs up for 40V WORX tools.
Key Specs:
- Model: WA3669.J
- Voltage and capacity: 20V, 2.0Ah
- Weight: 0.97 lb
- Works with: all WORX 20V and 40V PowerShare tools
- Compatible chargers: WA3742, WA3769, WA3881, WA3770, WA3884, WA3835
- Extras: charge-level indicator, push-button release
Detailed Review:
A 2.0Ah pack suits tools you hold up the whole time they run. On a string trimmer, hedge trimmer or handheld blower, the battery sits at the end of your arm, and a light pack keeps your shoulder from tiring before the edging is done.
It refills fast on the WA3881 quick charger or the WA3884 dual-port quick charger, so a pack drained in the morning is ready for an afternoon job. If one of the WORX chargers it works with is already in your garage, it slots in as a bare spare with nothing else to buy.
The charge-level indicator shows what’s left before you walk out to the far fence line, which saves a trip back for a fresh pack. The push-button release frees the pack from the tool easily, so moving it between a trimmer and a blower is quick.
On a mower or circular saw, a 2.0Ah pack runs out quickly, and that work belongs with a higher-capacity PRO pack. I’d make this the default pack for handheld yard tools and save bigger packs for mower decks and saw blades.
Pros:
- Light build keeps trimmers and blowers easy to hold.
- Refills quickly on WA3881 or WA3884 quick chargers.
- Works across WORX 20V and 40V PowerShare tools.
- Charge-level indicator shows remaining charge at a glance.
- Push-button release pops the pack out of the tool easily.
Cons:
- 2.0Ah capacity drains fast on mowers and circular saws.
- Can’t run a 40V tool without a second matching pack.
Who It’s For:
Homeowners who already run WORX trimmers, hedge trimmers or blowers and want a spare that keeps those tools light will get the most from this pack. It also suits anyone with a compatible WORX charger on the shelf. If your main tool is a mower or saw that works for long stretches, a higher-capacity pack fits better.
Editor’s Verdict:
This light, quick-charging 2.0Ah pack belongs on any WORX trimmer or blower, as long as you don’t ask it to carry a mower.
#2 WORX WA3674.J 20V 4.0Ah Battery — Best Budget
Mower and saw owners on the WORX platform get the most from this PowerShare PRO pack, which delivers longer runtime than a traditional 2.0Ah battery. Plan on using a charger you already own.
Key Specs:
- Model: WA3674.J
- Voltage and capacity: 20V, 4.0Ah PowerShare PRO
- Works with: all WORX 20V, 40V and 80V PowerShare tools
- Battery management: intelligent system that optimizes individual Li-ion cells
- Protection: thermoplastic housing for cooler cells, 360° cell protection
- Charger: not included
Detailed Review:
A mower or circular saw pulls hard enough to empty a small pack quickly, and the 4.0Ah capacity keeps that tool working much longer before you stop to swap. As a PowerShare PRO pack, it’s also the best match for WORX Nitro products.
Its intelligent battery management system optimizes the individual lithium-ion cells to get more power and runtime out of them. The thermoplastic housing keeps those cells cooler for longer, and cooler cells hold their output through a long cut instead of fading as they heat up.
The 360° cell protection guards against vibration and impact, which matters on a mower bouncing over roots or a saw set down hard on a tailgate. A charge-level indicator and push-button release handle the everyday checks and swaps.
It fits all WORX 20V, 40V and 80V PowerShare tools, so it moves across the whole yard lineup. It ships without a charger. That makes it an affordable way to add PRO runtime when you already have a WORX charger, and useless on its own if you don’t.
Pros:
- 4.0Ah PRO capacity runs heavy-draw tools longer per charge.
- Fits WORX 20V, 40V and 80V PowerShare tools.
- Thermoplastic housing keeps cells cooler during long runs.
- 360° cell protection resists vibration and impact.
- Charge-level indicator and push-button release make swaps easy.
Cons:
- Needs a separate charger for anyone new to WORX.
- Refills more slowly than a 2.0Ah pack on the same charger.
Who It’s For:
Anyone running a WORX mower, chainsaw or circular saw who already has a WORX charger will get the most use from this pack. It’s also a sensible step up for Nitro tool owners on the 20V platform. Skip it if you’re starting from nothing, since you’d still need to buy a charger.
Editor’s Verdict:
For mowing and cutting jobs that outlast a small pack, this PRO battery delivers the runtime, as long as a WORX charger is already waiting at home.
#3 WORX WA3669.J2 20V 2.0Ah Battery 2-Pack — Editor’s Choice
Two 20V 2.0Ah packs in one box let one charge while the other works, which keeps a trimmer-and-blower afternoon moving. They also pair up for 40V PowerShare tools.
Key Specs:
- Model: WA3669.J2
- Included: two 20V 2.0Ah lithium-ion batteries
- Works with: all WORX 20V and 40V PowerShare tools
- Compatible chargers: WA3742, WA3769, WA3881, WA3770, WA3884, WA3835
- Quick charging: WA3881 quick charger or WA3884 dual-port quick charger
- Extras: charge-level indicator, push-button release
Detailed Review:
Two identical packs change how a long yard session goes. One sits on the charger while the other runs the trimmer, so edging, trimming and a blower pass don’t stop for a recharge. Each pack has its own charge-level indicator, so you can tell at a glance which one to grab.
Because both packs have the same 2.0Ah capacity, they make a matched pair for 40V PowerShare tools straight out of the box. That saves you hunting for a second pack to match an older one you already own.
Both packs fit on the WA3884 dual-port quick charger together, and the WA3881 quick charger refills them one after the other at quick-charge speed. The push-button release makes moving a pack between tool and charger fast.
Each pack is still a 2.0Ah pack, so a mower or saw drains it quickly even with a spare waiting. This is the format I’d steer most WORX owners toward first, because a second pack does more for an afternoon on handheld tools than a bigger single pack does.
Pros:
- Two packs let one charge while the other runs.
- Matched capacity pairs cleanly for 40V PowerShare tools.
- Quick-charges on WA3881 or WA3884 chargers.
- Works with all WORX 20V and 40V PowerShare tools.
Cons:
- Each pack’s small capacity still empties fast on a mower.
- The second pack adds little for quick, light jobs.
Who It’s For:
If you trim, edge and blow in a long session, or you own a higher-voltage WORX tool that runs on paired packs, this set covers both needs. Someone who only edges a short driveway and is done before the pack runs low will get little from the spare.
Editor’s Verdict:
Swap-and-go convenience and a ready-made matched pair for 40V tools make this set the most practical way to add WORX 20V capacity.
#4 WORX WA3613 20V 2.0Ah Battery & Charger Kit — Also Great
If you’re starting from scratch, this kit is the simpler buy because the 20V 2.0Ah pack comes with a WA3881 2A quick charger. You can be trimming the day it shows up.
Key Specs:
- Model: WA3613
- Battery: 20V 2.0Ah PowerShare battery (WA3669)
- Charger: 20V 2A quick charger (WA3881) with a long power cord
- Compatibility: combines with more 20V packs for WORX 40V and 80V tools
- Protection: thermoplastic housing, 360° cell protection
- Indicators: on-board battery and charger indicators
Detailed Review:
Getting the battery and charger in one box means you won’t end up with a bare pack and nothing to charge it on. The included WA3881 is a 2A quick charger, so the pack refills fast enough to cover a morning trim and an afternoon blow-off on the same day.
The battery is a WA3669 PowerShare pack with a thermoplastic housing that keeps it cooler and 360° cell protection for durability. Both count on a trimmer that gets knocked against fence posts and set down on concrete.
The battery and the charger each have an on-board indicator, so a glance tells you whether the pack needs more time or is ready to go. The long power cord lets the charger sit on a shelf or workbench instead of on the floor by the outlet.
PowerShare lets you combine 20V packs to run WORX 40V and 80V tools, so the kit is a starting point you can build on. Add packs as you add bigger tools, and this first pack stays in the rotation.
Pros:
- Battery and 2A quick charger arrive together, ready to use.
- Thermoplastic housing keeps the pack running cooler.
- On-board indicators on both battery and charger.
- Long charger cord makes placement in the garage easier.
- Pack combines with more 20V packs for 40V and 80V tools.
Cons:
- Small 2.0Ah pack empties quickly on high-draw tools.
- Bundled charger adds little if you already own one.
Who It’s For:
New WORX owners buying a cordless trimmer or blower as a bare tool should pick this kit, since the charger comes in the box. It also suits anyone who wants a dedicated quick charger for a shed or another workspace. If a WORX charger is already in your garage, a bare pack makes more sense.
Editor’s Verdict:
By pairing a 2.0Ah pack with a 2A quick charger, this kit gets a new WORX owner running without a second order.
#5 WORX WA3675.J 20V 5.0Ah Battery — Also Great
Heavy-draw yard work, like mowing thick grass or cutting up storm limbs with a chainsaw, is where this 5.0Ah PowerShare PRO pack earns its place. It fits WORX 20V and 40V tools.
Key Specs:
- Model: WA3675
- Voltage and capacity: 20V, 5.0Ah PowerShare PRO
- Works with: all WORX 20V and 40V cordless tools, outdoor power equipment and lifestyle products
- Battery management: intelligent system that optimizes individual Li-ion cells
- Cooling: advanced thermoplastic housing keeps cells cooler
- Protection: 360° cell protection against vibration and impact
Detailed Review:
At 5.0Ah, this pack offers a high capacity and delivers a much longer runtime than a 2.0Ah battery. On a mower working through thick spring grass or a chainsaw cutting up storm limbs, that capacity keeps the tool going long after a small pack would be on the charger.
It has the PRO line’s intelligent battery management, cooler-running thermoplastic housing and 360° cell protection against vibration and impact. On long, hard runs, keeping the cells cool stops output from tailing off late in the charge. It fits WORX 20V and 40V cordless tools, outdoor power equipment and lifestyle products.
Next to the 4.0Ah WA3674.J, it adds runtime on every charge, but it spends longer on the charger each time you refill it. On a string trimmer or handheld blower, most of that capacity goes unused, and a smaller pack is back to full sooner. I’d put this pack on the mower or chainsaw and leave the 2.0Ah packs for the handheld tools.
Pros:
- 5.0Ah capacity keeps mowers and chainsaws running longer.
- Intelligent battery management optimizes each lithium-ion cell.
- Thermoplastic housing keeps cells cooler on long runs.
- 360° cell protection guards against vibration and impact.
Cons:
- Big capacity means a longer wait on any charger.
- More capacity than light trimmers and blowers need.
Who It’s For:
Yards with a WORX mower, a chainsaw for storm cleanup or a hedge trimmer that runs for long stretches are where this pack pays off. It works on single-pack tools and pairs up for the higher-voltage ones. If your yard work is quick edging and a pass with the blower, a smaller pack suits you better.
Editor’s Verdict:
Give this pack your mower or chainsaw, and its 5.0Ah PRO capacity will carry long sessions that drain smaller packs.
Should You Buy a Single Pack, a Two-Pack or a Charger Kit?
Buy by what you already own: a bare spare if a WORX charger is on the shelf, a matched pair for 40V tools and long sessions, and a battery-and-charger bundle if you’re starting from zero.

| Format | Fits best when | What it adds to your setup |
|---|---|---|
| Single pack | You already own WORX 20V tools and a charger | A spare to swap in mid-job |
| Two-pack | You run a 40V tool or work long sessions | A matched pair that also covers swaps |
| Charger kit | You’re buying your first WORX tool as a bare tool | A pack plus a quick charger |
Start from what you already own. If you have a WORX charger and a 20V trimmer or blower, a bare spare covers most needs, because you can swap packs whenever the indicator runs low. A 40V mower or blower, or a Saturday that runs from edging through cleanup, calls for a matched pair. The tool needs packs that drain together, and a long session needs a fresh pack waiting. With no WORX gear yet, the kit saves a second order. Capacity is a separate decision: if your main tool is a mower or saw, pick a higher-Ah pack in whichever format fits.
Is a Replacement Battery Worth It Over a Genuine WORX Pack?
No, not for most yards. A factory pack is the safer buy, and a third-party pack only makes sense as a spare for light-duty tools you can keep an eye on.

Third-party packs shaped to fit PowerShare tools are often sold as a bargain alternative. Some also print a higher Ah rating on the label than a factory pack of the same size, which makes them look like more runtime than they deliver.
Cell quality can vary between batches, so two packs bought from the same listing can run differently. A pack with mismatched cells loses runtime fast as the weakest cell drags the rest down. The protection circuit that should cut power when cells overheat, short or drain too far can be a weaker board, and that’s how a third-party pack ends up running hot. A pack WORX didn’t make can also complicate a warranty claim on the tool it powers, so read WORX’s warranty terms before relying on one.
These weaknesses show up most on high-draw tools. A mower or chainsaw pulls the most current, so a pack with weak cells or a thin protection board either cuts out early or heats up. In a 40V tool it also becomes the weaker half of the pair.
A third-party pack is a reasonable gamble as an occasional spare for a string trimmer or blower, charged in the garage where you can see it. I’d keep factory packs on anything with a mower blade or a saw chain, and on every 40V pair. If you do buy one, judge it by what the seller can show about the cells, the protection circuit, the safety listing and the return policy, not by the brand name on the listing.
How Long Does a WORX 20V Battery Last?
Lithium-ion packs fade gradually over several seasons rather than dying all at once, and charge cycles, heat and deep discharge decide how fast that happens.

Every charge-and-drain cycle wears the cells a little, so a pack that runs a mower every weekend ages faster than a spare that sees occasional use. Heat speeds up the wear. A pack left in a hot car or a sun-baked shed, or put on the charger straight off a hard-working mower, loses capacity faster than one kept cool. Running a pack until the tool stops and then leaving it empty in storage stresses the cells too.
Packs sit unused through the off-season, so winter storage matters. Keep them indoors in a dry spot away from freezing cold and from heaters, partly charged rather than full or flat, and off the charger. Check the charge-level indicator during the winter and top up any pack that has dropped low.
A worn pack shows clear signs. Runs get shorter, the indicator drops quickly after a full charge, and the pack can’t finish a job it used to handle, like trimming the whole backyard. Replace it when it can’t get through your usual job on one charge. Replace it right away if the case is cracked or swollen, or if it gets unusually hot on the charger.
A third-party pack can match the WORX housing and click onto the tool perfectly while the cells and protection board inside are built to a much lower standard. Weak cells show up as a pack that runs hot on the trimmer and quits early, and with no traceable seller behind it, you’re the one who pays when it fails.
How Can You Spot a Poor-Quality Replacement Battery?
A dependable third-party pack names its cell type and arrangement, has a real protection circuit, carries safety documentation, comes with a clear warranty and return policy, and makes a capacity claim that fits its size. A risky one is vague, or too generous, on those points.

- Cell type and arrangement: a seller that names the cells and how they’re arranged is selling a pack built to a known design. A listing that says nothing often hides generic cells that sag under load and heat up.
- Protection circuit: a real protection board cuts power when cells overheat, short or drain too far. That’s what keeps a hard pull from a mower from overheating the pack.
- Safety documentation: a safety listing from a recognized testing lab, printed on the pack itself, shows the design was checked for heat and short-circuit behavior.
- Warranty and return policy: clear written terms from a seller you can reach give you recourse when a pack dies early.
- Capacity claims: a pack the size of a factory 2.0Ah pack that claims a far higher rating is promising more than its cells can hold. An inflated label suggests the rest of the listing is exaggerated too.
Can You Use WORX Batteries in Other Brands’ Tools?
Not directly. A WORX PowerShare pack is built for WORX tools, and other brands use their own connectors and latches, so a third-party adapter is the only way to make it fit.

An adapter fixes the physical fit, but that’s about all it fixes. Brand-name tools often communicate with their own packs to manage temperature and current. Through an adapter that link may not work, so overload and over-discharge protection may not kick in when the tool pulls hard. The adapter also adds a joint that can loosen with vibration. Running a pack on another brand’s tool raises warranty questions for both the pack and the tool.
If you run more than one brand, keep each brand on its own batteries. Drills and drivers bought as DeWalt run best on DeWalt 20V batteries. A set of Ryobi tools stays on its own connector with Ryobi 18V batteries, which leaves your WORX packs for the WORX yard tools.

Write Your Review
No reviews yet. Be the first to share your experience!