10 Best Wood Chippers: Expert Picks Reviewed and Ranked
Our top picks for the best wood chippers in 2026 are the Yeryork Electric Wood Chipper 1.8″ (Best Overall), EWORK Electric Wood Chipper 15-Amp (Best Budget), SuperHandy Mini Wood Chipper Shredder 7HP (Best Gas-Powered), Earthwise GS70015 Electric Chipper (Best Lightweight), MechMaxx 8″ E-Start Wood Chipper 35HP (Best Premium), EFCUT Wood Chipper Shredder 7HP (Best Compact), Earthquake K32 33968 Chipper Shredder 212cc (Best for Small Spaces), Earthquake K33 33964 Chipper Shredder 301cc (Best Performance), Patriot CSV-2515 Electric Wood Chipper (Best Easy-Start), and Patriot CSV-3090B Gas Wood Chipper (Best Durability). They run from corded machines built for hedge trimmings to a towable gas chipper that takes 8-inch wood.

Branch capacity, power source, reduction ratio and storage footprint separate these machines more than anything else. A chipper that fits the limbs you cut most often, runs on power you can reach and parks where you have room will get used every season instead of sitting in the corner.
The worry most owners carry into this purchase is buying a machine that stalls on the wood they actually have, or one so big it never leaves the shed. Both mistakes come from sizing the chipper to a spec sheet rather than to the brush pile.
Before you buy, look at the largest limbs you cut in a normal year and the distance from your brush pile to the nearest outlet. Those two facts settle the gas-or-electric question and narrow the field to a handful of machines.
What Matters Most When Choosing Wood Chippers?
Maximum branch diameter, power source and reduction ratio decide most of how a chipper fits your yard. Branch capacity sets the thickest limb you can feed without sawing it down first, and a machine below your typical limb adds saw work to every session.

Power source splits the field: electric models start with a switch and need an outlet, while gas engines go anywhere and take thicker wood in exchange for fuel and oil upkeep. Reduction ratio tells you how many bags of loose debris shrink into one bag of chips, which decides how often you empty the bag or haul mulch. Once those three are settled, weight and footprint decide whether the machine fits your garage. Each factor gets a fuller breakdown in how to choose a wood chipper, and the track record behind different wood chipper brands matters if you expect parts and support for years.
The 10 Best Wood Chippers of 2026
Our top picks for the best wood chippers in 2026 are the Yeryork Electric Wood Chipper 1.8″, EWORK Electric Wood Chipper 15-Amp, SuperHandy Mini Wood Chipper Shredder 7HP, Earthwise GS70015 Electric Chipper, MechMaxx 8″ E-Start Wood Chipper 35HP, EFCUT Wood Chipper Shredder 7HP, Earthquake K32 33968 Chipper Shredder 212cc, Earthquake K33 33964 Chipper Shredder 301cc, Patriot CSV-2515 Electric Wood Chipper and Patriot CSV-3090B Gas Wood Chipper. The electric models stop at 2 1/2 inches or less and suit pruning cleanup near the house, while the gas machines take 3-inch branches anywhere on the property, and the MechMaxx reaches 8 inches.
#1 Yeryork Electric Wood Chipper 1.8″ — Best Overall
Homeowners clearing seasonal pruning cuts get the most from this electric chipper. Its dual-chute hopper sorts branches by size before they reach the SK5 blades, which cuts down on jams and kickback, and the 21:1 reduction ratio shrinks up to 21 bags of yard waste into one bag of chips.
Key Specs:
- Motor: 15-amp, 4000 RPM, copper windings
- Max branch diameter: 1.8 inches
- Reduction ratio: 21:1
- Blades: reversible dual-edged SK5 high-carbon steel
- Protection: overcurrent and overheat cutoff, rear-knob safety interlock, IPX4 water resistance
- Model: YYWCP-720
Detailed Review:
The dual-chute hopper is what makes this machine easy to feed. Thin twigs and thicker pruning cuts go through separate openings, so small sticks don’t ride in beside a branch near the 1.8-inch limit and wedge the feed. Behind it, the 15-amp motor spins at 4000 RPM on heat-resistant copper windings, giving a steady pull that draws wood into the blades without much pushing.
The SK5 high-carbon steel blades are dual-edged and reversible, so a dull side gets flipped rather than replaced, which doubles the working life of each blade. Anyone sorting through the best electric wood chippers should weigh that feature heavily, because blade upkeep is the recurring chore on a machine like this. Against the EWORK Electric Wood Chipper 15-Amp, this model spins slower but runs a 21:1 reduction ratio instead of 15:1, so the same brush pile packs into fewer bags.
The motor cuts power when current or internal temperature climbs too high, and the rear-knob interlock keeps the machine from starting while it’s open for cleaning. The polypropylene housing resists knocks and carries an IPX4 rating against splashes. Keep leaves, old roots, bamboo, dry hay, straw and frozen branches out of the hopper, since those clog it or damage the blades.
Pros:
- Dual-chute hopper separates twigs from thicker branches.
- Reversible SK5 blades give each blade a second edge.
- 21:1 reduction ratio packs debris tightly.
- Overcurrent and heat cutoff protect the motor.
- Interlock blocks startup while the rear knob is open.
Cons:
- 1.8-inch capacity rules out thicker limbs.
- Leaves, bamboo and frozen branches must stay out.
- Runs on household power, so work stays near an outlet.
Who It’s For:
Suburban homeowners who prune shrubs and small trees through the season and want an electric machine with real motor protection will get steady use from it, and gardeners who compost will like the fine chips. If your cleanup includes thick limbs or piles of leaves, a gas chipper shredder handles that work better.
Editor’s Verdict:
Reversible blades, a sorted feed and solid motor protection make this the electric chipper I’d hand to most homeowners first.
#2 EWORK Electric Wood Chipper 15-Amp — Best Budget
For routine pruning cleanup, this electric chipper is easy to haul around and easy on the neighbors. At 21 pounds with a 4500 RPM, 15-amp motor, it chips fresh branches and dry sticks up to 1.8 inches and ships with a 12-gallon collection bag and a spare pair of SK5 blades.
Key Specs:
- Motor: 15-amp, up to 4500 RPM
- Max branch diameter: 1.8 inches (45 mm)
- Reduction ratio: 15:1
- Weight: 21 pounds
- Included: 4 SK5 dual-edge blades, 12-gallon collection bag
- Warranty: 1 year with registration
Detailed Review:
Everything a first-time owner needs comes in the box. Four SK5 dual-edge blades ship with it, one pair installed and one in reserve, so a dull set doesn’t end a weekend job, and the 12-gallon collection bag catches chips as they leave the machine. For a low-cost chipper, that kit saves a separate order for spare blades and a bag.
The 15-amp motor reaches 4500 RPM and holds its torque under load, which keeps fresh branches and dry sticks moving through the blades instead of stalling. A 15:1 reduction ratio turns fifteen bags of debris into one bag of mulch for disposal or soil. If the hopper opens or an oversized piece goes in, the overload system and hopper lock cut the motor, and a reset button gets you shredding again.
At 21 pounds on all-terrain wheels, it rolls across a lawn easily, and its cTUVus certification and IPX4 rating cover North American safety standards and wet-weather use. The motor runs well below the noise of a gas chipper, so early-morning cleanup won’t wake the street. The 1.8-inch capacity is the limit to plan around, keeping this machine on pruning work rather than downed limbs.
Pros:
- Ships with a spare pair of SK5 blades.
- 12-gallon collection bag catches chips at the outlet.
- Weighs 21 pounds and rolls on all-terrain wheels.
- Hopper lock and overload reset protect the motor.
- Runs much quieter than a gas chipper.
Cons:
- 15:1 ratio packs debris less tightly than a 21:1 machine.
- 1.8-inch capacity limits it to pruning-size branches.
- Warranty coverage needs registration to activate.
Who It’s For:
Weekend gardeners with tidy beds, hedges and young trees who want a low-cost electric machine with spare blades in the box will get good use from it. Close neighbors will barely notice the noise. Anyone clearing storm-felled limbs or heavy brush piles should look at a gas chipper shredder instead.
Editor’s Verdict:
Spare blades, a collection bag and a quiet motor in a 21-pound package make this an easy pick for light pruning without overspending.
#3 SuperHandy Mini Wood Chipper Shredder 7HP — Best Gas-Powered
No cord, no outlet, and up to 3 inches of branch capacity make this chipper shredder a strong fit for brush piles far from the house. The vertical discharge chute angles from 90 to 145 degrees.
Key Specs:
- Engine: 7HP 4-stroke single-cylinder OHV, recoil start
- Max branch diameter: 3 inches
- Reduction ratio: 15:1
- Fuel: 87+ unleaded (ethanol-free recommended), 0.7-gallon capacity
- Weight: about 73 pounds
- Certification: EPA/CARB
Detailed Review:
The large extended feeding chute accepts branches, limbs and garden debris up to 3 inches across, thicker than any electric pick here can take. The 7HP four-stroke OHV engine supplies the torque for that work, and its 15:1 reduction ratio extends to brush, leaves and corn stalks, so one machine covers chipping and mulching.
The vertical extended discharge chute is the detail you’ll notice every time you run it. Its adjustable guide swings between 90 and 145 degrees, so chips land in a cart, a bed or a pile where you want them instead of needing a second shovel pass. At about 73 pounds, it weighs far less than the Earthquake K32 33968 Chipper Shredder 212cc, which makes loading it into a truck bed far more manageable.
Fill it with 87-octane or higher unleaded, ideally ethanol-free, and add engine oil before the first start because none is included. That fuel and oil routine is what you accept in exchange for cordless freedom, and it’s the main thing to weigh when you compare the best gas wood chippers with electric models. Keep fresh greens, pine cones, palm branches, petrified wood and vines out of the chute, since fronds jam it.
Pros:
- Takes branches up to 3 inches through an extended chute.
- Discharge guide adjusts from 90 to 145 degrees.
- Weighs about 73 pounds for easier loading.
- EPA/CARB certified engine.
- Shreds leaves and corn stalks as well as limbs.
Cons:
- Recoil start means pulling a cord every time.
- Engine oil isn’t included; add it before first use.
- Palm fronds, vines and fresh greens jam the chute.
Who It’s For:
Rural and suburban owners with brush piles beyond extension cord reach, or with pruning cuts too thick for an electric hopper, will put this machine to good use. It suits people comfortable with routine small-engine care. Neighbors on tight lots who want quiet early-morning work should look at an electric model.
Editor’s Verdict:
This is the machine to buy when your cleanup happens far from an outlet and the limbs run thicker than electric hoppers allow.
#4 Earthwise GS70015 Electric Chipper — Best Lightweight
Dry, seasoned sticks and a cramped shed suit this corded chipper well. It weighs just under 30 pounds, rolls on transport wheels and drops chips from its heat-treated SK5 blades straight into a 10.5-gallon collection bag.
Key Specs:
- Motor: 15-amp corded electric
- Branch capacity: 1.5 to 1.8 inches
- Reduction ratio: up to 15:1
- Weight: 29.76 pounds
- Collection bag: 10.5 gallons
- Blades: heat-treated SK5 steel
Detailed Review:
At just under 30 pounds with transport wheels, this chipper rolls to a hedge row and back into a garage corner without much lifting. The 10.5-gallon collection bag keeps chips contained, so cleanup after a pruning session stays quick.
The 15-amp motor chips sticks and brush 1.5 to 1.8 inches thick, and it does its best work on dry, seasoned material. Green or freshly cut branches carry more moisture, which lowers efficiency, so I’d let fresh prunings dry before feeding them. Heat-treated SK5 steel blades, shipped with a coat of anti-rust oil, reduce yard waste by up to 15:1 into fine mulch for compost.
The extension cord matters as much as the chipper. Use a 12-gauge (12 AWG) cord for runs up to 75 feet, or 10-gauge for longer distances, to prevent voltage drop, overheating and lost power; the cord is sold separately. Overload protection guards the motor, and a safety interlock switch between the cover and main body adds a layer of protection for the operator.
Pros:
- Just under 30 pounds on transport wheels.
- 10.5-gallon collection bag keeps chips contained.
- Heat-treated SK5 blades arrive coated with anti-rust oil.
- Overload protection and interlock switch guard the motor.
Cons:
- Green, freshly cut wood lowers chipping efficiency.
- Extension cord is sold separately.
- Capacity stops at 1.5 to 1.8 inches of branch.
Who It’s For:
Gardeners who let pruned branches dry before cleanup and want a machine they can move around without straining will like it. Townhome gardens and anyone storing tools in a tight closet fit it well. Owners chipping fresh, sappy cuttings right after pruning will get better results from a stronger gas chipper.
Editor’s Verdict:
Easy to move, easy to store and well protected, it rewards owners who feed it dry, seasoned wood.
#5 MechMaxx 8″ E-Start Wood Chipper 35HP — Best Premium
Acreage owners, orchard keepers and anyone facing a backlog of storm-felled limbs should look here. An electric-start 1000cc, 35HP engine drives it through wood up to 8 inches in diameter, and a towbar with four wheels lets you pull it between work areas.
Key Specs:
- Engine: 1000cc 35HP 4-stroke air-cooled OHV, electric start, 45Ah 12V battery
- Max branch diameter: 8 inches
- Reduction ratio: 20:1
- Wheels: 19-inch front, 13-inch rear, with towbar and tail light
- Cutting: 2 double-edge A8 alloy steel blades plus anvil, Kevlar belts
- Support: 2 years on machine and engine
Detailed Review:
The 8-inch chipping diameter handles limbs that would otherwise need cutting down first, and it changes the scale of cleanup you can handle. Downed limbs go into the feeding drum without being cut to pruning size first, and the 1000cc engine starts from its 45Ah 12V battery instead of a pull cord. This machine sits at the premium end, and that capacity is what the spend buys.
Two double-edge blades of A8 alloy steel work against an anvil, and the alloy resists corrosion and wear. Kevlar belts hold up better than ordinary belts, which cuts how often the machine needs maintenance. The 20:1 reduction ratio shrinks heavy brush into chips you can use as ground cover or work into soil.
Mobility is built around towing, with a trailer bar, 19-inch front and 13-inch rear wheels and a tail light. The rotary discharge chute and adjustable deflector aim chips straight into a truck bed or trailer. An emergency stop button above the feeding drum and a press bar below it sit within the operator’s reach, and both machine and engine carry 2 years of after-sales support.
Pros:
- Chips wood up to 8 inches in diameter.
- Electric start draws on a 45Ah 12V battery.
- Towbar and four wheels make relocation simple.
- Rotary discharge chute aims chips into trailers.
- Emergency stop button and press bar sit near the operator.
Cons:
- Towing design assumes a vehicle or tractor to pull it.
- Lead-acid battery needs charging during long idle stretches.
- Far more machine than pruning-only yards need.
Who It’s For:
Owners of wooded acreage, orchards and properties that see regular storm damage will put its capacity to work. Landscapers and rental outfits fit the profile too. A suburban homeowner trimming hedges and fruit trees will find it oversized and hard to store, and an electric chipper serves that job well.
Editor’s Verdict:
Few homeowners need this much chipper, but for acreage and storm cleanup, the 8-inch capacity and towable chassis justify the investment.
#6 EFCUT Wood Chipper Shredder 7HP — Best Compact
Tight storage and a 3-inch limb pile make a good match for this folding chipper shredder. Its 7HP, 212cc OHV engine reaches 3600 RPM and carries a low oil alert sensor, while the long-neck chute keeps loading simple and your hands clear of the roller.
Key Specs:
- Engine: 7HP 212cc 4-stroke OHV, recoil start, 3600 RPM max
- Max branch diameter: 3 inches
- Reduction ratio: 15:1
- Capacities: 0.73-gallon fuel (2.8 L), 0.13-gallon oil (0.5 L)
- Design: foldable frame, long-neck chute, cutting roller
- Warranty: 1 year after registration, blades excluded
Detailed Review:
The foldable design sets this machine apart once the season ends, because it folds down and frees up floor space in the garage or shed. Assembly is quick, and the long-neck chute simplifies loading while keeping your hands at a safe distance from the blades and rollers.
A cutting roller handles the chipping, and blade replacement is simple when the edges wear. The 7HP, 212cc OHV engine reaches 3600 RPM with quick recoil starting and takes branches up to 3 inches with a 15:1 waste reduction ratio. Its low oil alert sensor protects the engine from damage, which matters on any small engine that could run low on oil during a long session.
It holds 0.73 gallon of 87-octane or higher unleaded, ideally ethanol-free, and 0.13 gallon of oil, which you supply. Leaves and corn stalks shred alongside limbs, but fresh greens, pine cones, palm branches, petrified wood and vines stay out because fronds jam the roller. The 1-year warranty starts with product registration and excludes consumables such as blades.
Pros:
- Folds down to save storage space.
- Takes branches up to 3 inches across.
- Low oil alert sensor protects the engine.
- Long-neck chute keeps hands away from the roller.
- Shreds leaves and corn stalks besides chipping limbs.
Cons:
- Recoil starting means a pull cord on every startup.
- Warranty excludes blades and other consumables.
- Engine oil must be bought separately.
Who It’s For:
Homeowners who share the garage with cars, mowers and bikes and still need gas power for thicker pruning cuts are the right buyers. Seasonal users who chip after spring and fall cleanups will appreciate how little room it takes between jobs. Anyone who wants to skip fuel and oil upkeep should stay with an electric model.
Editor’s Verdict:
Fold-away storage and a protected engine make it easy to own a 3-inch gas chipper without surrendering garage space.
#7 Earthquake K32 33968 Chipper Shredder 212cc — Best for Small Spaces
Owners storing gear in a crowded shed get a full chipper shredder on a 25.4-by-29.9-inch footprint. Its 212cc Viper engine chips branches up to 3 inches across while a top hopper shreds twigs and leaves, and the flat-free wheels mean no tire to pump before each use.
Key Specs:
- Engine: 212cc 4-cycle Viper
- Max branch diameter: 3 inches (chipper cone)
- Reduction ratio: 20:1
- Weight: 118 pounds
- Wheels: 11-inch, never-flat
Detailed Review:
Two feed paths split the work on this machine. Branches up to 3 inches go into the chipper cone, while smaller twigs and leaves drop into the top hopper, where Tri-Hammers and J-hammers in the rotor shred them into mulch. That setup clears a mixed brush pile of sticks, prunings and leaves without sorting everything for a single opening.
The 212cc four-cycle Viper engine powers both paths, and a 20:1 reduction ratio shrinks a brush pile to a small fraction of its volume. The 11-inch wheels never go flat, so the machine is ready to roll to the chipping site after months in storage. A debris bag comes with it to catch the mulch.
The footprint is the reason to pick this model: it is compact enough to fit a shed corner or the end of a garage bay. Next to the Earthquake K33 33964 Chipper Shredder 301cc, it gives up engine displacement but is narrower and lighter, a compromise that makes sense when storage is tight. At 118 pounds, it rolls far more easily than it lifts, so plan on wheeling it rather than loading it into a vehicle.
Pros:
- Narrow footprint fits a shed corner or garage bay.
- Separate cone and hopper handle branches and leaves.
- Flat-free 11-inch wheels need no air.
- 20:1 reduction ratio shrinks brush piles hard.
- Includes a debris bag for collecting mulch.
Cons:
- 118 pounds is heavy to lift into a vehicle.
- Smaller engine than its K33 sibling.
- Gas engine brings fuel and oil upkeep.
Who It’s For:
If your garage already holds a mower, a snow blower and a workbench, this gas chipper shredder still finds room. It suits mixed brush piles of branches and leaves on a typical suburban property. Owners with acreage or frequent storm debris may want more engine than it offers.
Editor’s Verdict:
Choose it when the shed decides the purchase; you still get full chipping and shredding in a footprint that parks easily.
#8 Earthquake K33 33964 Chipper Shredder 301cc — Best Performance
Big, mixed brush piles call for more engine, and this machine supplies it. A 301cc Viper engine drives the chipper cone through branches up to 3 inches across while Tri-Hammers and J-hammers in the rotor shred leaves fed through the top hopper.
Key Specs:
- Engine: 301cc 4-cycle Viper
- Max branch diameter: 3 inches
- Footprint: 29.9 in wide × 29.9 in long
- Weight: 138 pounds
- Wheels: 11-inch, never-flat
- Debris bag: dock-and-lock
Detailed Review:
The 301cc Viper engine is the reason to step up to this model. Against the Earthquake K32 33968 Chipper Shredder 212cc, that’s noticeably more displacement driving the same rotor, which gives it more pulling power through dense brush and a steady stream of thick branches. Bigger leaf piles and longer sessions are where that extra power shows.
The layout matches its smaller sibling: branches go into the chipper cone, and twigs and leaves drop into the top hopper for Tri-Hammers and J-hammers to shred in the rotor. A dock-and-lock debris bag collects the mulch. The 11-inch wheels never go flat, so it rolls out ready after sitting all winter.
Both machines share a 3-inch branch limit, so the bigger engine buys power at the same size, not thicker limbs. That power comes with more bulk: at 29.9 inches wide and 138 pounds, this model is wider and heavier than the K32 and takes more garage floor. If you shred big leaf piles alongside branches every fall, I’d take the bigger engine; for occasional pruning, the smaller model is enough.
Pros:
- 301cc Viper engine adds pulling power for dense brush.
- Cone and hopper split branches from leaves.
- Dock-and-lock debris bag collects mulch.
- Flat-free 11-inch wheels roll without maintenance.
Cons:
- Same 3-inch branch limit as the smaller K32.
- 138 pounds makes lifting into a truck difficult.
- Wider body claims more garage floor.
Who It’s For:
Large suburban lots with mature trees, heavy leaf fall and frequent brush piles give this engine plenty of work. Owners who want the same cone-and-hopper layout with more power behind it are the natural fit. If your branches rarely grow past pruning size and storage is cramped, the smaller Earthquake model makes more sense.
Editor’s Verdict:
Pick it when power matters more than garage space; the bigger Viper engine gives the cone-and-hopper design more muscle without changing how it works.
#9 Patriot CSV-2515 Electric Wood Chipper — Best Easy-Start
If pull cords and carburetor care have soured you on gas tools, this electric chipper shredder starts with the flip of a switch. It turns branches up to 2 1/2 inches into coin-sized chips.
Key Specs:
- Motor: 1.5 HP corded electric
- Max branch diameter: 2 1/2 inches
- Chip size: coin-sized
- Hopper: large top hopper for leaves
- Discharge: side discharge into a standard collection bag
- Weight: 95 pounds
Detailed Review:
The maintenance-free electric motor is the reason to buy this machine: there’s no fuel to go stale and no oil to change, and it starts with the flip of a switch. It also runs quiet and smooth, which makes weekend-morning cleanup easier on the neighbors.
It takes thicker wood than the other electric picks here, turning branches up to 2 1/2 inches into coin-sized chips. Unlike the Yeryork Electric Wood Chipper 1.8″, which shouldn’t take leaves, this model has a large top hopper made for shredding them, so a fall leaf pile and spring prunings go through the same machine. Everything processed exits the side into the standard collection bag.
At 95 pounds, it’s much heavier than the EWORK Electric Wood Chipper 15-Amp or the Earthwise GS70015 Electric Chipper, so moving it takes more effort and it needs a dedicated storage spot. The cord also sets your working range, since the motor only runs as far as its power reaches. Patriot adds 1 year to the chipper’s warranty when you buy its red-and-white striped electric cord.
Pros:
- Starts with a switch, no pull cord.
- Maintenance-free motor skips fuel and oil.
- Large top hopper shreds leaves easily.
- Makes coin-sized chips from branches up to 2 1/2 inches.
- Patriot’s striped cord extends the warranty by a year.
Cons:
- 95 pounds is a lot to move for an electric chipper.
- Corded power keeps the work near an outlet.
Who It’s For:
Anyone tired of choke settings and stale gas who still wants to chip branches and shred leaves will like this machine. It fits homes with a garage outlet and a yard of mixed trees and shrubs. Owners with brush far from power, or who need to move the machine often, will be happier with a gas model on wheels.
Editor’s Verdict:
Flip a switch and get to work: this chipper trades portability for a hands-free-of-upkeep motor that handles both branches and leaves.
#10 Patriot CSV-3090B Gas Wood Chipper — Best Durability
All-day chipping sessions at a single brush pile suit this machine. A 9 hp Briggs engine feeds branches up to 3 inches through a funnel-shaped cone, and the greasable outboard bearing is built for seasons of that kind of work.
Key Specs:
- Engine: 9 hp Briggs
- Max branch diameter: 3 inches
- Chip size: coin-sized
- Leaf shredding: swinging y-hammer system
- Discharge: side discharge
- Weight: 139 pounds
Detailed Review:
The greasable outboard bearing is the part that signals long service life. A bearing you can grease stays lubricated through hard use instead of wearing dry, and regular greasing is a simple chore that keeps the drive turning season after season. Patriot builds the rest of the machine around a rugged design to match.
The 9 hp Briggs engine drives branches up to 3 inches down the funnel-shaped cone and turns them into coin-sized chips. Leaves go through the swinging y-hammer system, and hammers that pivot give way slightly when they strike something hard, which helps them handle mixed debris.
The side discharge makes all-day work practical, because chips land beside the machine and you can keep feeding from the same location without repositioning. Compared with the Patriot CSV-2515 Electric Wood Chipper, this model takes thicker branches, 3 inches against 2 1/2, and frees you from the cord. It also weighs 139 pounds to the electric model’s 95 and adds engine upkeep.
Pros:
- Greasable outboard bearing supports long service life.
- Turns branches up to 3 inches into coin-sized chips.
- Swinging y-hammers shred leaves cleanly.
- Side discharge lets you work from one spot.
Cons:
- 139 pounds is hard to move across rough ground.
- Bearing needs periodic greasing to stay healthy.
- Gas engine adds fuel and oil chores.
Who It’s For:
Property owners who build up big brush piles and like to clear them in long, steady sessions will appreciate how this machine holds up. It suits people who don’t mind greasing a bearing and changing oil. If you need a machine you can lift into a car or carry up steps, look for an electric chipper instead.
Editor’s Verdict:
Built around a greasable bearing and a strong Briggs engine, this is a chipper meant to stay in service for many seasons.
How Do These Wood Chippers Compare at a Glance?
The electric picks top out between 1.5 and 2 1/2 inches of branch, the gas chipper shredders handle 3 inches, and the MechMaxx reaches 8 inches.

| Pick | Power source | Max branch diameter | Reduction ratio | Weight | Standout feature |
|---|---|---|---|---|---|
| Yeryork Electric Wood Chipper 1.8″ | Electric, 15-amp | 1.8 in | 21:1 | — | Dual-chute hopper, reversible blades |
| EWORK Electric Wood Chipper 15-Amp | Electric, 15-amp | 1.8 in | 15:1 | 21 lb | Spare blades and 12-gallon bag |
| SuperHandy Mini Wood Chipper Shredder 7HP | Gas, 7HP | 3 in | 15:1 | about 73 lb | Adjustable vertical discharge chute |
| Earthwise GS70015 Electric Chipper | Electric, 15-amp | 1.5–1.8 in | up to 15:1 | 29.76 lb | 10.5-gallon collection bag |
| MechMaxx 8″ E-Start Wood Chipper 35HP | Gas, 1000cc 35HP | 8 in | 20:1 | — | Electric start, towbar |
| EFCUT Wood Chipper Shredder 7HP | Gas, 7HP 212cc | 3 in | 15:1 | — | Foldable design, low oil alert |
| Earthquake K32 33968 Chipper Shredder 212cc | Gas, 212cc | 3 in | 20:1 | 118 lb | 25.4 × 29.9 in footprint |
| Earthquake K33 33964 Chipper Shredder 301cc | Gas, 301cc | 3 in | — | 138 lb | Larger engine, dock-and-lock bag |
| Patriot CSV-2515 Electric Wood Chipper | Electric, 1.5 HP | 2 1/2 in | — | 95 lb | Switch start, large leaf hopper |
| Patriot CSV-3090B Gas Wood Chipper | Gas, 9 hp Briggs | 3 in | — | 139 lb | Greasable outboard bearing |
At the low-cost end, the EWORK sticks to a corded motor and pruning-size capacity but adds spare blades and a bag. Mid-range gas chipper shredders step up to 3-inch chipping plus leaf shredding, and the premium tier buys what the MechMaxx offers: towable mobility, electric start and far thicker limbs. If spending is the deciding factor, comparing the best wood chippers under $300 against wood chippers under $500 shows how much capacity each step up adds.
Should You Choose a Gas or Electric Wood Chipper?
Gas is the pick when limbs run past electric capacity or the brush pile sits far from an outlet; electric wins when the work stays light and close to the house. Settling this fork first narrows the field quickly, because every gas pick here takes branches of 3 inches or more and every electric pick stops short of that.

How Do Power and Branch Capacity Differ?
Gas engines take thicker wood. Every gas pick in this roundup handles branches up to 3 inches, and the MechMaxx 8″ E-Start Wood Chipper 35HP reaches 8 inches, while the electric picks stop between 1.5 and 2 1/2 inches.
Electric motors protect themselves with overload cutoffs, which means a piece that is too dense or too thick stops the motor instead of forcing through. That saves the machine but interrupts the job, so electric models do their best work when you feed them within their limit.
Moisture changes the picture as well. The Earthwise GS70015 Electric Chipper works best on dry, seasoned material and loses efficiency on fresh cuttings, while the EWORK Electric Wood Chipper 15-Amp is built to take fresh branches and dry sticks alike. Gas chipper shredders such as the Earthquake models add a hammer-fed hopper, so leafy green debris has its own path instead of loading the chipping blades.
Which Is Quieter and Easier to Maintain?
Electric chippers win on both counts. The EWORK runs well below gas-chipper noise, and the Patriot CSV-2515 starts with the flip of a switch with no fuel or oil to manage, which makes corded machines the easier fit for close neighborhoods and early-morning work. If noise is your main constraint, start with the best quiet wood chippers.
Gas machines ask more of you. The SuperHandy and EFCUT start on a recoil cord, run on 87-octane or higher unleaded with ethanol-free fuel recommended, and need engine oil you add yourself; the EFCUT’s low oil alert helps, but it doesn’t replace checking levels. The Patriot CSV-3090B adds a bearing to grease, and the MechMaxx’s electric start depends on a battery that needs charging between seasons.
If your free time for engine chores is short, weigh that upkeep as heavily as capacity when you compare the best wood chippers for homeowners.
Which Fits Your Storage Space and Yard Layout?
Electric models are easier to store and move. The EWORK weighs 21 pounds and the Earthwise just under 30, while the SuperHandy weighs about 73 pounds and the Earthquake and Patriot gas machines range from 118 to 139.
Cord reach is the electric limit. A 15-amp chipper needs a 12-gauge extension cord for runs up to 75 feet and a 10-gauge cord beyond that, so a brush pile at the back of a long lot favors gas.
For storage, the EFCUT folds down, the Earthquake K32 sits on a 25.4-by-29.9-inch footprint, and the never-flat wheels on both Earthquake models roll easily on lawn. The MechMaxx needs trailer-style parking and a vehicle to tow it, which only makes sense on a property with room for both.
What Branch Size Do You Need a Wood Chipper to Handle?
Your thickest regular limb should set the capacity you buy, because a chipper below it turns every cleanup into saw work, while one far above it demands more storage space and upkeep than the job needs. Sorting the best wood chippers for branches by diameter first keeps you from paying for capacity you won’t use.

What Works for Twigs, Brush and Small Limbs?
Corded electric models cover this tier. The Yeryork, EWORK and Earthwise take branches up to 1.8 inches, and the Patriot CSV-2515 reaches 2 1/2, which handles hedge trimmings, shrub prunings and fallen twigs.
These machines chip dry, seasoned wood cleanly into fine mulch, and their collection bags keep the work tidy near beds and patios. Fresh, wet wood is where they struggle: the Earthwise loses efficiency on green material, and the Yeryork shouldn’t take frozen branches.
Letting prunings sit and dry before chipping keeps an electric machine working at its best, and it reduces the stalls that come from sappy, fibrous cuts.
What Works for Typical Homeowner Limbs?
Gas chipper shredders that take 3-inch branches fit this middle tier: the SuperHandy, EFCUT, both Earthquake models and the Patriot CSV-3090B. That capacity covers the limbs you take down when shaping fruit trees, clearing a fence line or cleaning up after a windy week.
They also shred, which matters on properties with mature trees. The Earthquake hopper uses Tri-Hammers and J-hammers, the Patriot uses swinging y-hammers, and the SuperHandy and EFCUT mulch leaves and corn stalks along with limbs.
Owners with regular leaf fall and a mix of branch sizes get the most from this tier, because one machine processes the whole pile. The cost is weight, fuel and oil upkeep, and a recoil start on several of these engines.
What Works for Heavy Limbs and Large Properties?
A large-capacity, towable machine like the MechMaxx makes sense when limbs regularly exceed 3 inches and the work spreads across wooded acreage, orchards or storm-prone ground. Its 8-inch capacity lets you feed whole limb sections, and the 360-degree discharge chute fills a trailer directly.
That capability comes with real demands. The towbar assumes a vehicle or tractor, storage means a trailer-sized spot, and the electric start depends on a battery you keep charged. Anyone weighing this class should compare the best wood chippers for large branches, and the best tow behind wood chippers if the machine will move between distant work sites.
For a suburban lot, this tier is overkill; the machine spends more time parked than working.
What Do Reduction Ratio and Engine Size Mean for Your Yard?
These specs translate directly into how many bags you haul and how often the feed stalls, which is why they deserve more attention than the size of the engine badge.

What Does Reduction Ratio Mean for Mulch Volume?
Reduction ratio is how much bulk the machine removes from yard waste. A 15:1 ratio, like the EWORK’s, means fifteen bags of loose debris become one bag of chips; the Yeryork’s 21:1 packs even tighter, and the MechMaxx and Earthquake K32 sit at 20:1.
A higher ratio means fewer bag changes during a session and fewer trips to the curb or compost pile. It also produces finer chips, which break down faster in compost and spread more evenly as mulch.
The ratio matters most when you bag everything. If chips go straight onto a pile or into a trailer, branch capacity and feed speed shape your day more than the final volume.
How Do Engine Size and Cutting Design Affect Performance?
Engine displacement, listed in cc, measures the size of the cylinder, and a larger engine generally holds speed better when dense wood enters the feed. The Earthquake K33’s 301cc engine pulls harder than the K32’s 212cc on the same rotor, and the MechMaxx’s 1000cc, 35HP engine is in a different class entirely.
Cutting design decides what the machine does with that power. Blades chip: the Yeryork’s SK5 blades and the MechMaxx’s blades-and-anvil setup slice branches into chips. Hammers shred: the Earthquake Tri-Hammers and J-hammers and the Patriot y-hammers batter leaves and twigs into mulch.
Among blade machines, a flywheel-mounted disc throws chips with force, while a rotating drum pulls branches in steadily. That difference is worth knowing before you compare the best disc style wood chippers with the best drum style wood chippers.
Which Wood Chipper Is Right for Your Yard?
Small lots do best with an electric chipper, tidy pruning cleanup suits a corded model with a collection bag, and thick limbs or acreage call for gas, scaling up to the towable MechMaxx.

On a small suburban lot, the Yeryork, EWORK and Earthwise handle hedge and shrub prunings without fuel or noise, and the best wood chippers for small yards follow the same logic. If leaves are a big part of your cleanup, the Patriot CSV-2515 adds a leaf hopper to electric convenience.
Mixed brush piles of 3-inch limbs and leaves point to the Earthquake K32 or K33, the SuperHandy or the Patriot CSV-3090B, with the EFCUT for owners short on storage. Wooded acreage and storm cleanup belong to the MechMaxx, and owners running land for crops or livestock will find more options among the best wood chippers for small farms.
A chipper rated for 1.8-inch branches can still stall on a thin length of bamboo or a handful of wet leaves, because some materials fight the blades no matter their size. Vines and palm fronds wrap around moving parts, and frozen wood strikes an edge harder than seasoned wood does. Feed the wrong load in the middle of a big cleanup and you’ll be pulling the machine apart to clear a jam with most of the pile still waiting.
What Should You Never Feed a Wood Chipper?
Keep roots, bamboo, vines, palm fronds, pine cones, petrified wood, dry hay, straw and frozen branches out of a wood chipper, because each one either clogs the feed or damages the cutting edges.

Fibrous, stringy material is the main jam risk. Bamboo, vines, palm fronds, hay and straw don’t break cleanly; they wrap around blades and rotors and bind the feed. Old roots carry soil and stones that dull edges quickly, and petrified wood is mineralized to the point of acting like rock.
Frozen branches are hard and brittle, so they strike the blades with more shock than seasoned wood. Pine cones and fresh greens pack into the cutting area instead of passing through.
Leaves need the right machine. Blade-only electric models like the Yeryork shouldn’t take them, while chipper shredders with a hammer hopper are built for them. If leaves make up most of your cleanup, look at the best chipper shredders for leaves, or the best wood chippers for twigs and leaves for mixed light debris.
How Can You Tell When Chipper Blades Need Attention?
Slower feeding is the first sign: branches that used to pull in on their own start needing a push, and the motor or engine labors on wood it handled easily before. Chips come out ragged and stringy instead of clean, and jams become more frequent.

Reversible blades buy time. The dual-edged SK5 blades on the Yeryork and EWORK can be flipped to expose a fresh edge, and the EWORK ships with a spare pair, so a dull set doesn’t end a session. Machines like the EFCUT are built for simple blade replacement when edges wear.
Replace rather than flip or sharpen when both edges are dull, when an edge is chipped or cracked, or when a blade no longer sits flat in its mount. Running damaged blades strains the drive and throws uneven chips, and a cracked blade can fail under load.
What Safety Gear and Habits Matter Before You Start Chipping?
Eye protection, sturdy gloves and hearing protection come first, along with fitted clothing that can’t catch in the feed. Gas machines are loud enough that hearing protection belongs on every session, and flying chips make safety glasses non-negotiable on any chipper.

Feed branches butt end first and let the machine pull them in rather than pushing with your hands. Stand to the side of the hopper so a kicked-back piece doesn’t come straight at you, and keep clear of the discharge chute.
Before clearing a jam, unplug an electric model or shut down a gas engine and wait for everything to stop moving. Built-in protection helps but doesn’t replace that habit: the Yeryork, EWORK and Earthwise have interlocks and overload cutoffs, and the MechMaxx adds an emergency stop button and press bar within the operator’s reach.
Wood Chipper FAQs
Is a wood chipper worth buying for a homeowner?
Yes, if you prune regularly or have mature trees. A chipper turns brush piles into mulch you can spread or compost, and its reduction ratio shrinks bulky debris into a fraction of the bags. Owners who only trim a shrub or two each year can usually rely on yard-waste pickup instead.
Can electric wood chippers handle green wood?
Some can, within their limits. The EWORK Electric Wood Chipper 15-Amp takes fresh branches and dry sticks up to 1.8 inches, while the Earthwise GS70015 works best on dry, seasoned material and loses efficiency on green cuttings. Frozen branches should stay out of electric machines like the Yeryork entirely.
What extension cord does an electric chipper need?
A 15-amp chipper needs a 12-gauge (12 AWG) extension cord for runs up to 75 feet and a 10-gauge cord for longer distances. Lighter cords cause voltage drop, overheating and lost power. Plug into a GFCI-protected outdoor outlet, and keep the cord out of the path of the discharge chute.
Can a wood chipper handle storm cleanup?
It depends on limb size. Electric models handle fallen twigs and small branches, while 3-inch gas chipper shredders take most broken limbs, and larger trunks need a chainsaw first or a machine like the MechMaxx. The best wood chippers for storm cleanup lean toward gas power and higher branch capacity.
How do you get rid of wood chips?
Spread them as mulch around trees and beds, use them on garden paths, or mix them into a compost pile, where finer chips break down faster. Keep fresh chips a few inches from tree trunks and house foundations. For excess, check your local yard-waste collection rules before setting chips at the curb.
More Guides on Best Wood Chippers
- Best Wood Chippers Under $1000
- Best Walk Behind Wood Chippers
- Best Tow Behind Wood Chippers
- Best Electric Leaf Shredders
- Best Gas Leaf Shredders
- Best Pto Wood Chippers
- Best Wood Shredders
